Eastwood’s award-winning Aerosol-Injected Cleaning System directs a focused blast of cleaner to penetrate deep into hard-to-reach places Our Aerosol-Injected Cleaning System was the 2011 Winner of Popular Mechanic’s™ Magazine Editor’s Choice Award for Product Innovation and Design! One of the key reasons was the engineered taper of each can’s nozzle that creates a tight seal to force the cleaner deep into the tool or tubing, without blowback.
You get 1 can of Aerosol-Injected Cleaner
Brake, transmission and fuel lines
Removes paint, grease, machining oils and other contaminants
Aerosol-Injected Cleaner is ideal for cleaning anything around the car, shop and home. 360-degree valve even sprays upside down! Unique two-piece injection system allows you to configure the application tips to your specific job. Can clip keeps extension nozzle from getting lost. The more you use this cleaning system, the more uses you’ll find!
1. Test-fit the injector tip into area to be cleaned. Make sure it fits snugly into place.
2. Put on eye protection and point nozzle away from your face.
3. Insert nozzle tip into orifice and gently push the can to deliver the cleaner. Always store with the extension tube removed to prevent accidental discharge.
10041Z PRE Painting Prep
43090 Safety Goggles
11456 SAS Bandit Respirator
13000 Buff Shop Dust Mask
(Q) Does the long extension nozzle come off?
(A) Yes. Point the can away from you and with a slight twisting motion it will come off. It has a handy clip so you can attach it to the can.
(Q) Can I remove the bottom nozzle?
(A) No, because there’s no reason to remove it. It can’t be used on any other aerosol, nor has it been tested with any other aerosols.
(Q) Why didn’t anyone else think of this?
(A) We’re Eastwood, Johnny. It’s what we do.
POINT AWAY FROM FACE! Always wear eye, skin and respiratory protection when using these products. Use in a well-ventilated area away from open flame. VOC content: MCP Maximum 1.90.
Instructions and MSDS