Contour™ 1-step Premium Body Filler actually inhibits rust and self-etches!
Rust inhibitors prevent corrosion
Self-etching properties create excellent adhesion
Superior coverage and feather-edging ability
1-step process; no glazing putty required
Save time in your shop with our “all-in-1-step” custom-blended premium body filler. It contains rust inhibitors to prevent corrosion long after painting, and its unique self-etching properties bite into the surface for maximum adhesion. A great “1-2 punch” to help finish bodywork faster and more effectively!
Contour™ 1-step Premium Body Filler spreads smoothly and sands beautifully to eliminate pinholes, and the feather-edging properties won’t clog sandpaper. No glazing putties needed! May be top-coated with epoxy or urethane primer. Includes 2-oz. cream hardener.
0.8-gal. can Contour Premium Body Filler
2-oz. Cream Hardener
13521ZP Contour™ Glazing Putty
13919 Eastwood Filler Spreaders
31273 Eastwood Filler Mixing Board
10041Z PRE Painting Prep
31160 Dura-Block Sanding Blocks
21538 Larry Lyles “Basic Body Repair” DVD
43579 Dual-Action Random-Orbit Sander
43120 Eastwood Fender Stand
Thoroughly mix desired amount of material with cream hardener. Using a clean spreader, fill to desired level. Do not exceed 1/4″ depth. Allow to cure for at least 15 minutes before sanding. Abrade with 80-grit and follow up with 120-grit to achieve desired contour. Final finish with finer abrasives. If necessary, apply Eastwood’s 13521ZP Contour™ Glazing Putty for final finishing. Topcoat with quality primer, such as Eastwood’s Epoxy or Urethane Primers.
CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.
Always wear eye, skin and respiratory protection when using this product. Always apply in a well-ventilated area. Consult MSDS and product label for specific safety warnings.
Instructions and MSDS